Home > Heater

Saving igniter HF688/Fast ignitor/Safety of use/Saving Gsa

Saving igniter HF688/Fast ignitor/Safety of use/Saving Gsa

Name: Saving igniter HF688/Fast ignitor/Safety of use/Saving Gsa
Brand: HEAT FOUNDER Silicon Nitride Igniter, Silicon Nitride Heating Element
Availability: InStock
Rating: 5 (1 reviews)

The Saving Igniter consists of a set of gas control valves, an automatic ignition device and a control system.
It is designed for manual flame brazing operation, and then brazing frequent start-stop use occasions, greatly reducing the torch ineffective

INQUIRY PDF Format

Description

Ignition

Get rid of the traditional lighter ignition method, to achieve rapid electronic ignition

Energy saving

Adopting low power consumption design, it can effectively reduce the ineffective
combustion time of torch, save gas and reduce cost in occasions where torch is frequently used.

Convenient

Easy to operate. The operation panel only has a power switch and a flame detection switch,
which makes it easy to get started.

Safety

1. Once the ignition fails, the solenoid valve will automatically shut off in sequence to cut off
    the gas flow;
2. When shutting off the gas, it automatically realizes shutting off the gas first and then the
    oxygen, in order to reduce the tempering machine filter;
3. When the welding torch falls off due to accident, the solenoid valve can automatically shut
    off and cut off the gas flow to ensure personal safety;
4. Set up a solenoid valve on and off tip light, can intuitively display the work status, to avoid
    danger due to the solenoid valve is not closed;
5. The solenoid valve and wires all adopt internal design to avoid accidental direct contact
    with the flame, to ensure safety;
6. The inlet side is equipped with a filter to prevent solid particles from entering the solenoid
     valve and affecting its sealing.

Name	SAVING IGNITER
Model	HF688
Material	Silicon Nitride (Si3N4)
Voltage	220V Customized
Power	Customized
Flange	Ceramic/Customized
Temp Range
Ignition Time	up to 1000°c in 10 seconds
Samples fee	Please contact us for confirmation.
Packing	Carton
Lead time	5 working days for samples; 12 working days for mass production
QC	Strict quality control under SGS, ISO9001 and Intertek.
Certification	BSCI, ISO9000/1400,BV TUV SGS FSC etc.
Applications Customized

·Rapid heating: Heating faster. up to 1000°c in 10 seconds ·Range of temperature:1100~1300 °C/2012~2372℉ ·Small size / High watt density: High-watt density discharge allow high thermal efficiency. ·Long working life:10 years possible,90,000 hours ·High insulation ·Direct water and kerosene heating ·Vacuum environment ·Oxidation and chemical resistance

Send your message to us: